How To Add Cisco Nexus 9k Switch in Eve-ng

The Cisco Nexus 9000 Series switches, renowned for their performance, scalability, and advanced data center features, are essential components in modern network infrastructures. Integrating these switches into your network simulations can greatly enhance your learning and testing environments. EVE-NG (Emulated Virtual Environment Next Generation) is a versatile and powerful emulation platform that supports a wide range of network devices, including the Cisco Nexus 9000v switches.

This guide provides a step-by-step approach to adding a Cisco Nexus 9000v switch to your EVE-NG environment. By following these instructions, you will be able to:

  1. Download and prepare the necessary Nexus 9000v image.
  2. Upload the image to your EVE-NG server.
  3. Configure the EVE-NG platform to recognize and use the Nexus 9000v switch.
  4. Verify the integration by adding and configuring the switch in a lab environment.

Whether you are a network professional seeking to refine your skills or an IT student preparing for certification exams, this guide will help you leverage the capabilities of the Cisco Nexus 9000 Series within EVE-NG, providing a robust platform for your network simulations and testing.

1. Cisco Nexus 9k Images in eve-ng.

EVE Image NameDownloaded FilenameVersionvCPUsvRAM
nxosv9k-7.0.3.I7.4nxosv9k-7.0.3.I7.4.qcow2nxosv9k-7.0.3.I7.428192

Other versions should also be supported following bellow’s procedure

2. Download Cisco Nexus 9k Images for Eve-ng

if you have access to the Cisco software portal, you can directly download the image from the Cisco website from the below URL.

https://software.cisco.com/download/home/286312239/type/282088129/release/7.0%25283%2529I7%25284%2529

No worries, if you do not have access to Cisco Website you can download the image from the below alternate link.
Download Cisco Nexus 9k Image

Images provided above are strictly for educational purposes and are not hosted on the www.networkhunt.com server. We are just indexing the links found on the internet for educational purposes only. Once you download the image then we are going to go for the next step.

3. Preparing Eve-ng Cisco Nexus 9k switch.

The steps below are based on nxosv-final.7.0.3.I7.4.qcow2 creation, for another image deployment, use proper names respectively.

SSH to EVE-ng and login as root, from cli and create a temporary working directory on the EVE’s root:

mkdir /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I7.4/


Upload the downloaded nxosv-final.7.0.3.I7.4.qcow2 image to the EVE /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I7.4/ using for example FileZilla or WinSCP.

From cli go to created directory and rename the image to Sataa.qcow2.

cd /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I7.4/
mv nxosv-final.7.0.3.I7.4.qcow2 sataa.qcow2

Now we need to Fix permissions in eve-ng, once done we are good to start the node

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

5. NX9K first boot setup steps.

Now you must be seeing node in Eve-ng. when you start the node it will take some time to start depending on your cpu and memory.
you may be getting a loader on the screen once Nexus completed its booting.

Insert below command to check all the available file

dir
you will see output mentioning the boot file as like below image.

after running dir command you will be able to see NXOS image then just use below command and press enter
loader > boot nxos.7.0.3.I7.4.bin

it will take some time to load depending on cpu and memory once done it will ask for a prompt answer

1. Start node and on the prompt answer:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: yes
Do you want to enforce secure password standard (yes/no) no

Enter passwords for admin:
admin
admin

Would you like to enter the basic configuration dialog (yes/no): no

2. Login in your switch first time:

User Access Verification
 login: admin
 Password: admin

3. dir flash: To get the proper image name to set  boot nxos from it

switch# dir bootflash:
       4096    Apr 18 00:53:27 2017  .rpmstore/
       4096    Apr 18 00:53:47 2017  .swtam/
      14160    Apr 18 00:58:45 2017  20170418_005603_poap_26331_init.log
  757307904    Feb 16 17:17:14 2017  nxos.7.0.3.I7.4.bin
          0    Apr 18 01:00:14 2017  platform-sdk.cmd
       4096    Apr 18 00:55:47 2017  scripts/
       4096    Apr 18 00:55:57 2017  virt_strg_pool_bf_vdc_1/
       4096    Apr 18 00:54:00 2017  virtual-instance/
         59    Apr 18 00:53:52 2017  virtual-instance.conf

4. Enter into global configuration mode:

switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# boot nxos bootflash:nxos.7.0.3.I7.4.bin
end
copy run start 

Now your NX9K after reboot or stopping node will start normally. Steps 1-3 need to to do one time on every first added NX9K node on the topology!

Now your switch is ready !!!

Ensure that the image file is correctly named and located in the correct directory.Verify that the permissions are correctly set for the image files and directories.Check for any specific EVE-NG version requirements or compatibility notes for the Nexus 9000v image.

For any Queries or help Comment below, and help us by sharing on Facebook, LinkedIn, or Twitter.

Subscribe
Notify of
guest

26 Comments
Newest
Oldest
Inline Feedbacks
View all comments
hamed
hamed
2 years ago

Why does he not accept any password I enter?
I enter the password in the order it wants, but the following message is displayed

Enter the password for “admin”:

Admin password confirmation failed. Please try again.

I use passwords in numbers, lowercase letters, uppercase letters and symbols BUT NOT WORKING

EA
EA
4 years ago

Hi, do you have tutorial for N7K?

jesica
jesica
5 years ago

help me..

If you proceed the same as above, the following log pops up and you cannot boot normally

image hash: 6d201ff6 47c0a72e fd4ccef8 3d0c979d
[ 6.431671] [1574832083] Error: Could not find mtd devices

Wilson Albert III
Wilson Albert III
5 years ago

I’ve followed the steps exactly but I have my own image – nxosv.9.2.3.qcow2. When I go to open up program, it just hangs. I waited overnight. It is set to defaults – 2 cpu, 8192 memory, etc… I even changed the name as the instructions state from nxosv,9.2.3.qcow2 to sataa.qcow2 but the switch won’t stay on unless I either capitalize the S in sataa.qcow2 or add nxosv9k-sataa.qcow2 to the Linux name. I’ve fixed permissions a dozen times. I even tried VNC instead of putty or secureCRT. VNC just states not boot. Both putty and secureCRT just hangs there when I have the Sataa.qcow2 or nxosv9k-sataa.qcow2 applied. Can someone please help me out? I’ve tried on two different laptops. One laptop I have the vL2/L3 configure. This one I don’t have configured but same thing happens. I need to create a lab for VPC configuration between several pairs of L3 switches.

Charles
Charles
5 years ago

I setup as described on this page, when nxos boot, I get loader prompt and i run command boot nxos.7.0.3.I7.4.bin.
But every time I press enter, it adds an extra carriage return and this is messing up initial config as yes to abort auto provisioning also feeds carriage return to setup secure paasword and then when setting initial password and enter, will also feed a carriage return to confirmation password making confirmation password blank and it wont let me abort.
How do I get rid/fix extra carriage return?
Any help is appreciated.
Charles .

hwmq
hwmq
2 years ago
Reply to  Charles

I know this is old but I was running into this issue as well with the built-in Windows telnet client that would auto launch my console session when using Chrome or Edge. I switched to Firefox and it gave me a prompt to select a handler for the telnet connection, I was able to switch it to PuTTY which seems to handle the carriage returns correctly.

farid
farid
5 years ago

3h
3h
3h
3h
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,6f771edf-c83a-436d-b8b7-17c23a9d59e0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,136c9c75-7a50-48c4-14b3-13c1cb3c6bea)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,85b96414-6e94-4247-0da6-51c8adbc7073)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,894191e4-652d-40e6-5c83-e25699d1a666)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,a215830b-694d-42ac-369c-27779994b529)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,283e2bb9-9e0b-4e86-33ac-52dff90441d0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a4217258-e536-4282-6cb8-aaf9db72d657)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,6f771edf-c83a-436d-b8b7-17c23a9d59e0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,136c9c75-7a50-48c4-14b3-13c1cb3c6bea)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,85b96414-6e94-4247-0da6-51c8adbc7073)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,894191e4-652d-40e6-5c83-e25699d1a666)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,a215830b-694d-42ac-369c-27779994b529)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,283e2bb9-9e0b-4e86-33ac-52dff90441d0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a4217258-e536-4282-6cb8-aaf9db72d657)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0x9f000
Total memory is 0x800000
Sysconf checksum failed -1, Using default values
WARNING: No BIOS Info found
Sysconf checksum failed -1, Using default values
serial –speed=115200 –word=8 –stop=1 –parity=no

success
Sysconf checksum failed -1, Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
3h
3h
===========================================
directory: /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I7.4/
file: sataa.qcow2

I am getting error. what is that?

BalaG
BalaG
5 years ago
Reply to  farid

Even I faced similar case..repeated the below command multiple times at loader prompt..and resolved..

boot nxos.7.0.3.I7.4.bin

farid
farid
5 years ago

3h
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,6f771edf-c83a-436d-b8b7-17c23a9d59e0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,136c9c75-7a50-48c4-14b3-13c1cb3c6bea)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,85b96414-6e94-4247-0da6-51c8adbc7073)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,894191e4-652d-40e6-5c83-e25699d1a666)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,a215830b-694d-42ac-369c-27779994b529)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,283e2bb9-9e0b-4e86-33ac-52dff90441d0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a4217258-e536-4282-6cb8-aaf9db72d657)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,6f771edf-c83a-436d-b8b7-17c23a9d59e0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,136c9c75-7a50-48c4-14b3-13c1cb3c6bea)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,85b96414-6e94-4247-0da6-51c8adbc7073)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,894191e4-652d-40e6-5c83-e25699d1a666)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,a215830b-694d-42ac-369c-27779994b529)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,283e2bb9-9e0b-4e86-33ac-52dff90441d0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a4217258-e536-4282-6cb8-aaf9db72d657)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0x9f000
Total memory is 0x800000
Sysconf checksum failed -1, Using default values
WARNING: No BIOS Info found
Sysconf checksum failed -1, Using default values
serial –speed=115200 –word=8 –stop=1 –parity=no

success
Sysconf checksum failed -1, Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
3h
3h
==========================================================================
mkdir /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I7.4/
file: sataa.qcow2

Hello dear friend. I installed Nexus Image, just it did not start. could u help me pls?

daniyal
daniyal
5 years ago

I am getting error as mentioned below in the last, however I followed each every step as it is, kindly help me out.

loader > dir
Setting listing for bootflash:
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Going to print files for device bootflash: 1
.rpmstore
nxos.7.0.3.I7.4.bin
bootflash_sync_list
.swtam
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Clearing listing for bootflash:

loader > boot nxos.7.0.3.17.4.bin
Booting nxos.7.0.3.17.4.bin
Trying diskboot
dev_str: bootflash: partition_str: 3 filename_str /nxos.7.0.3.17.4.bin
command = root (hd0,3)
Filesystem type is ext2fs, partition type 0x83
Formed cmdline console=ttyS0,115200n8nn loader_ver=”5.01.0″ quiet debug
Formed cmdline console=ttyS0,115200n8nn loader_ver=”5.01.0″ quiet debug ksimg=nxos.7.0.3.17.4.bin card_index=21099 dummy_sprom swiotlb=48000
Booting kickstart image: bootflash::3:/nxos.7.0.3.17.4.bin….
Number of devices detected by BIOS is 1
ERROR

image length read 0

image hash: c941e6b0 ae3ecc98 72f8a26f ddcd986d
Boot failed

Error 9: Unknown boot failure

please please please help me out!

eve ng
eve ng
5 years ago

Please tell me where you can download free images
Firepower 2130
Catalyst 9300

Asd
Asd
5 years ago

Also it gets stuck after this by following the same set of output lines again and again.

Asd
Asd
5 years ago

Hi,

This is what I get when I start my nx os. Can you please help ?

/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0x9f000
Total memory is 0x800000
Sysconf checksum failed. Using default values
WARNING: No BIOS Info found
Sysconf checksum failed. Using default values
serial –speed=115200 –word=8 –stop=1 –parity=no

success
Sysconf checksum failed. Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1

kevin
kevin
5 years ago

Hi,
When I try to turn on BGP feature, it complains about license. And BGP just doesn’t work. Any idea how to get around this?

r1(config)# 2019 Apr 18 21:45:20 r1 %$ VDC-1 %$ clis[27331]: !!!!!! WARNING: ‘LAN_ENTERPRISE_SERVICES_PKG’ LICENSE NOT FOUND ON THE SYSTEM !!
!!!!. You have tried to enable a licensed feature [bgp] without installing the ‘LAN_ENTERPRISE_SERVICES_PKG’ license, which has not been found
on the system.
2019 Apr 18 21:45:20 r1 %$ VDC-1 %$ clis[27331]: System supports honor based license.Feature will be enabled and fully functional.License usage
for feature will appear after license install and a reload.
2019 Apr 18 21:45:20 r1 %$ VDC-1 %$ clis[27331]: If you have enabled this feature in error, please disable the feature. If you have not purchas
ed the license, please contact your Cisco account team to order the license. It is in violation of Cisco’s Terms of Use to use this feature wit
hout purchasing the license.

kevin
kevin
5 years ago
Reply to  kevin

Actually, I’m sorry. Please ignore. It works just fine.

Adrian
Adrian
5 years ago
Reply to  kevin

Actually I am having this problem also…how did you fix it?

Sherlock
Sherlock
5 years ago

I did every step but when Nexus boot, it stuck in loader and I saw this log:

2019 Apr 4 08:08:26 %$ VDC-1 %$ Apr 4 08:08:25 %KERN-0-SYSTEM_MSG: [ 10.144781] [1554365075] Error: Could not find mtd devices – kernel
..System is coming up … Please wait …
2019 Apr 4 08:08:51 %$ VDC-1 %$ %USER-0-SYSTEM_MSG: before access to bkout_cfg – clis
..2019 Apr 4 08:09:25 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: <> logflash: online – usbhsd
.2019 Apr 4 08:09:46 %$ VDC-1 %$ %SYSMGR-2-SIGKILL_FAILURE: Service “pixm_vl” failure to respond to SIGKILL causing supervisor to reset. Last heartbeat 63.27 secs ago.

I try everything but still not work. Can you help me?

Tushar
Tushar
5 years ago

After loading i am getting the bash-4.2#. How to enter Cisco NX-OS from the bash-4.2# prompt ?

syed
syed
5 years ago
Reply to  Tushar

bash-4.2#
bash-4.2#
bash-4.2# dir
bin isan_lib.img mod-1 usr_ro
boot isan_lib_eth.img modflash usr_rw
boot_dev isan_lib_eth_ro n3k_tor_delete.list var
boot_eth isan_lib_n9k_ro nativeboot vdc_10
bootflash isan_lib_n9k_rw nfsroot vdc_11
cgroup isan_lib_ro nginx vdc_12
cmn isan_lib_rw nxos vdc_13
data isan_n9k_bin.img opt vdc_14
debug isan_n9k_lib.img proc vdc_15
debugfs isanboot proc_isan vdc_16
dev lc rd vdc_17
dklm_lc.tar lc_n9k_ro root vdc_2
etc lc_ro rpms vdc_3
home lc_rw sbin vdc_4
init lcimages slot0 vdc_5
isan lib smack vdc_6
isan_bin.img lib64 sys vdc_7
isan_bin_eth.img linuxrc sys_block_bootdev vdc_8
isan_bin_eth_ro log tmp vdc_9
isan_bin_n9k_ro logflash usbslot1 vmachine
isan_bin_n9k_rw media usbslot2 volatile
isan_bin_ro mgmt usr
isan_bin_rw mnt usr.img
bash-4.2#
bash-4.2#

JXG
JXG
3 years ago
Reply to  syed

sudo su

passwd admin

type in new password

Not sure how well it work sbut i just did that and it let me login to the switch

you have to type exit two times in bash to bring switch prompt but you wont be able to login unless you change password at least i couldn’t… I downloaded image from cisco

Leerz
Leerz
5 years ago

It takes sometime to install but it is working!

26
0
Would love your thoughts, please comment.x
()
x